Tuesday, November 12, 2013

Starting The Tree-Cutter

We have to make a robot for our final project. We were able to choose from any robotic application as long as it was agile and could be constructed in a reasonable amount of time. After doing some research, I decided on a robot that would cut down trees(in theory).

I thought up a design and I came up with a fairly wide robot on tracks. I will need a ping or IR sensor on a positional servo to sense for trees. Then it will drive towards the tree until it is close enough. It will look for a color painted on a tree. If it is there, then it will start cutting. if it is not there, it will turn around and keep looking. It will continue to do this until it has cut a specified number of trees. Here is a flowchart of what I hope it will do.

 
 
My first challenge was finding a suitable chassis. I looked at several that I found that were already built but I decided that it would be easier to start from the beginning to get exactly what I want. I started with the tracks so I could get a good base. After working out some minor bugs, I think I know how I need to configure it for the tracks to fit. I don't have much yet but it's a work in progress.
 
 

  

No comments:

Post a Comment